Sharp UX-A1000 - Manual (Page 63)

Sending a Fax by Automatic Dialing
61
3. Sen
d
in
g
Fa
x
e
s
Sending a Fax by Automatic Dialing
You can dial a fax or phone number by simply pressing a Rapid Key, or by
pressing and entering a two-digit number.
♦
To use Automatic Dialing, you must first store the full fax or phone number
in your fax machine.
♦
When you store a fax or phone number, you select a two-digit Speed Dial
number for it. Ninety-nine Speed Dial numbers are available.
SPEED DIAL
5
When you hear the fax tone, press . Replace the handset.
•
If the transmission is completed successfully, the machine will beep once.
•
If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 102).
START/
MEMORY
Speed Dial numbers 01
through 18 are for Rapid
Key (one-touch) Dialing.
Speed Dial numbers
19 through 99 are for
dialing with the
key. SPEED DIAL
01
SPEED DIAL 1 9
START/
MEMORY
all.book Page 61 Wednesday, November 12, 2003 9:50 AM