Samsung SP-P310ME - Manual (Page 9)

1. Power Button [ ]
To turn it on
Press the Power button. The Power LED will light
up and the power is turned on.
To turn it off
Press the Power button until the Power LED is
turned off.
2. Menu Button [ ]
Press to display the OSD menu.
This is also used to exit the OSD or to return to a
higher level of the OSD menu.
3. Adjustment Button [ ]
Press to move the OSD menu or to adjust a value
on the menu screen.
4. Enter Button [ ] / SOURCE Button
Press to select an OSD menu or to select an
input source.
When pressing the 'SOURCE' button when the
menu screen is not displayed, the input source
(PC, Composite)is switched.
5. SERVICE
The SERVICE terminal is used for after-sales
services only.
6. PC/COMPOSITE
To connect a PC or VCR, the PC/Composite
cable must be connected here.
7. POWER LED
If you turn the projector on, the Power LED lights
up and if you turn it off, the Power LED turns off
accordingly.
8. TEMP LED
This lights up when the product is abnormal
because of hot temperature.Refer to the Status of
the Operating LEDs .
9. Power Port [ ]
To supply power, the power adapter must be
connected.
10. Lens
11. Focus Ring
Move it to the left or right to sharpen the image.
12. Battery Port
Install the designated battery to this port.
( For more information about the battery, refer to
the battery description. )
Accessories