Pstn interface, Mac address, User id – Sony SNC-VL10P User Manual
Page 20: Password, Phone number, Connection timeout for idle traffic, Dial tone, Script enable, Login script, Apply/cancel/help
Se
tt
in
g
s
b
y
A
d
m
ini
s
tra
to
r
Configuring the Network — Network Setting Page
20
PSTN Interface
This menu is displayed when Select Network Interface
is set to PSTN.
For setting the items in the LAN menu, see “LAN” on
page 18.
MAC Address
Displays the MAC address of the camera.
User ID
Type the user ID for Internet connection.
Password
Type the password for Internet connection.
Phone Number
Type the telephone number of the ISP access point.
Connection Timeout For Idle Traffic
Type the duration (in seconds) so that the telephone line
is disconnected automatically if there is no data
communication during the specified duration.
Dial Tone
Select the dialing type of the telephone line: Tone or
Pulse.
Script Enable
Sets if a specified script is required for logging in or not.
Select Enable when you use a script; Disable when you
do not use it.
Login Script
Select the login script from the drop-down list: End,
Wait For, Wait For Prompt, Send, Send CR, Send
User ID, Send Password or Delay, and type a required
script in the box on the right.
Apply/Cancel/Help