Woodstock SHOP FOX W1712 - Manual (Page 35)

MAINTENANCE
-23-
Regularly clean your sanding belt and disc as
sawdust builds up in the grit. Clean the sanding
belts and discs with PRO STICK
® belt cleaners
as shown in Figure 27. Cleaning built-up saw-
dust will prolong the life of your sanding belts
and discs.
To ensure optimum performance from your
sander, make a habit of inspecting it before
each use.
Check for the following conditions
and repair or replace when necessary:
• Loose mounting bolts.
• Worn switch.
• Worn or damaged cords and plugs.
• Any other condition that could hamper the
safe operation of this machine.
MAKE SURE that your
machine is unplugged
during any maintenance
procedures except
where instructed other-
wise! If this warning is
ignored, serious per-
sonal injury may occur.
Figure 27. Cleaning the sanding belt with
PRO STICK ® .
Sanding Surfaces
General
MAINTENANCE
Tables can be kept rust-free with regular appli-
cations of products like SLIPIT
® . For long term
storage you may want to consider products like
Boeshield T-9™.
Table And Base