Woodstock SHOP FOX W1712 - Manual (Page 24)

ASSEMBLY
-12-
Figure 6. Mounting the sander.
Mounting the sander to the stand will require
the help of an assistant. Secure the sander to
the stand using the cabinet stand hardware
bag.
UNPLUG sander before
you do any assembly!
Otherwise, serious per-
sonal injury to you or
others may occur!
The Model W1712 is a
heavy machine at 165
lbs. Use assistance
when lifting or moving
the machine.
Mounting Sander
To mount the sander, do these steps:
1. KEEP THE SANDER UNPLUGGED!
2. Place the sander on the stand.
3. Align the holes in the cabinet with the
pre-drilled and tapped mounting holes in
the sander.
4. Secure the sander to the stand as shown in
Figure 6.