Smeg CB66CES - Manual (Page 4)

Instructions for the installer
6
2. INSTALLING THE APPLIANCE
The appliance must be installed by a qualified engineer in compliance with the relevant regulations.
Depending on the type of installation, it is in class 1 (Fig. A) or class 2 - sub-class 1 (Fig.B-C).
It may be installed against walls one of which is higher than the worktop surface, at least 50 mm from
the side of the appliance, as shown in the installation class drawings A and B. Wall units or extractor
hoods installed above the appliance's work-top must be at least 750 mm above it.
A B
Built-in Appliance Free-Standing Installation
C
Appliances with gas cylinder compartment and electric oven may only be installed in free-
standing mode (see fig.
B).
2.1 Wall fixing (on some models only)
• Stretch out the chain attached to the cooker
horizontally so that the other end touches the
wall.
• Mark the wall in the position where the hole is to
be drilled.
• Drill the hole, insert a wall plug and attach the
chain.
• Move the cooker up against the wall.