Sony Ericsson J200 - Manual (Page 31)

White Paper J200
31 November 2004
WAP operator technical data
WAP profiles 5 WAP profiles, each with its own settings
WTLS (security) Yes,
WTLS Class 1 - Encryption
WTLS Class 2 - Encryption + Server Authentication. Root Certificates
needed in phone
Feature Support for WAP in the J200
WAP Browser
Version 1,21 baseline
WAP Provisioning
Total Parameter sets 5
Parameter set list Name
Startpage
IP settings:
CSD phone no., CSD Data rate, CSD dial type
GPRS APN, password request, allow calls, authentication, quality
of services
IP address
UserId and password
Security on/off
Show images on/off
Manual selection Yes, between Analog (V32) and Digital (V110)
Parameter sets include WAP/CSD, WAP/GPRS (different sets)
Factory pre-configuration WAP/CSD (possibility to lock a setting), WAP/GPRS
OTA WAP/CSD, WAP/GPRS configuration possible
Simultaneous OTA WAP/CSD, WAP/GPRS configuration possible
Single OTA one of WAP/CSD or WAP/GPRS configuration is possible
Bookmarks Not empty by default
URL format Underlined
Security mechanism
OTA provisioning (if empty) Operator verification through a code, included in the OTA data. This
code is shown to the user who can choose installation or not.
Interface (if empty) An Install question is asked with the code, if available.
The user has to choose if a new WAP profile shall be created or an
existing profile shall be replaced.
Re-provisioning (Set 1 filled) As above
Interface (Set 1 filled) As above
Feature Support in the J200 WAP browser