Settings you can change with the user tools, Regarding how to access the user tools, see, General features – Savin 10502 User Manual
Page 18: Table, Table heading, Table row, Menu, Description, Table body, Function priority
User Tools (System Settings)
10
1
Settings You can Change with the User
Tools
Reference
Regarding how to access the user tools, see
P.5 “Accessing User Tools (Sys-
General Features
Menu
Description
Function Priority
You can specify the mode that is displayed when the opera-
tion switch is turned on or System Reset is activated.
Note
❒ Default: Copier
Reference
See “System Reset”
Panel Tone
A tone sounds when a key is pressed. You can turn the tone
on or off . You can also select the volume level from Low,
Medium, and High.
Note
❒ Default: On (volume: Medium)
Ready Panel Tone
You can specify whether to sound the tone when the ma-
chine becomes ready for copying after Energy Saver mode
is deactivated or the power is turned on.
Note
❒ When the “Panel Tone” is set to OFF, the tone does not
sound even if the “Ready Panel Tone” is set to ON.
❒ Default: On
Copy Count Display
You can set the copy counter to show the number of copies
in the current job made so far (count up) or the number of
copies to be made (count down).
Note
❒ Default: Up (count up)