Shindaiwa X7502864301 - Manual (Page 4)

4
WARNING!
Inspect front and rear handles for damaged or loose attachments before use. NEVER operate a hedge trimmer
with damaged or loose handles.
Operating Precautions
WARNING!
Never transport the hedge trim-
■
mer or leave it unattended with the
engine running. An engine that’s
running could be accidently acceler-
ated causing the blades to oscillate.
Make sure that the blade cover is in
■
place when transporting or storing
the hedge trimmer.
Always make sure that the cut-
■
ter attachment and all handles and
guards are properly installed and
firmly tightened before operation.
Inspect for broken, missing or
■
improperly installed parts or
attachments.
Never use a cracked or warped cut-
■
ter or cutter bar: replace it with a
serviceable one and make sure it
fits properly.
Make sure there are no missing or
■
loose fasteners, and that the stop
switch and throttle controls are work-
ing properly.
Make sure there is always good
■
ventilation when operating the
hedge trimmer. Fumes from engine
exhaust can cause serious injury or
death. Never run the engine indoors!
Never smoke or light fires near the
■
hedge trimmer. Keep the unit away
from excessive heat. Engine fuel is
very flammable and fire could lead
to serious personal injury or prop-
erty damage.
Make sure the cutters are cor-
■
rectly adjusted before operating
the hedge trimmer (see the sec-
tion ”Blades” for cutter adjustment
procedures). Never attempt cutter
adjustment with the engine running!
Before starting the engine, make
■
sure the cutter is not contacting
anything.
Always confirm safe operation
■
when using the machine.
Immediately stop the engine with
■
the stop switch if the machine sud-
denly begins to vibrate or shake.
Always stop the engine imme-
■
diately and check for damage if
you strike a foreign object or if the
machine becomes tangled. Do not
operate with broken or damaged
equipment.
When cutting a branch that is
■
under tension, be alert for spring-
back so that you will not be struck
by the moving branch.
If a cutter should bind fast in a cut,
■
shut off the engine immediately.
Push the branch or tree to ease
the bind and free the cutter.
Always stop the engine and allow
■
it to cool before refueling. Avoid
overfilling and wipe off any fuel
that may have spilled.
To reduce fire hazard, keep the
■
engine and muffler free of debris,
leaves, or excessive grease
Keep a Solid Stance. Maintain
■
footing and balance at all times.
Do not stand on slippery, uneven
or unstable surfaces. Do not work
in odd positions or on ladders. Do
not over reach.
CAUTION!
Always maintain the hedge trim-
■
mer according to this owner’s man-
ual and follow the recommended
scheduled maintenance.
Never modify or disable any of the
■
hedge trimmer’s safety devices.
Doing so may cause damage and
lead to personal injury
Always use genuine Shindaiwa
■
parts and accessories when repair-
ing or maintaining this machine.
Do not make unauthorized modifi-
■
cations to the hedge trimmer or its
components.
Keep the cutters sharp and prop-
■
erly adjusted.
Never allow the engine to run at
■
high speed without a load. Doing
so could damage the engine.
When transporting the hedge
■
trimmer in a vehicle, tie it down
securely to prevent fuel spillage or
damage to the machine.
Always stop the engine and allow
■
it to cool before refueling. Avoid
overfilling and wipe off any fuel
that may have spilled.
Never place flammable material
■
close to the engine muffler and
never run the engine without the
spark arrestor screen in place.
Always clear your work area of
■
trash or hidden debris to help
ensure good footing.
Keep the hedge trimmer as clean
■
as possible. Keep it free of loose
vegetation, mud, etc.
WARNING!
Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching
blades whenever possible, and always wear gloves to protect hands