Sony CMT-HX3 - Manual (Page 23)

CMT-HX3.GB.3-095-514-11(1)
GB
O
thers
Play does not start from the first
track.
 Press PLAY MODE
 repeatedly until
both “PGM” and “SHUF” disappear to
return to normal play.
Starting playback takes more time
than usual.
 The following discs take a longer time
to start playback.
 a disc recorded with a complicated
tree structure.
 a disc recorded in multisession
mode.
 a disc that has not been finalized (a
disc to which data can be added).
 a disc that has many folders.
USB device
Are you using a supported USB
device?
 If you connect an unsupported USB
device, the following problems may
occur. See “Playable USB devices”
(page 29) for the supported device
types.
 The USB device is not recognized.
 File or folder names are not
displayed on this system.
 Playback is not possible.
 The sound skips.
 There is noise.
“Over Current” appears.
 A problem has been detected with the
level of electrical current from the
(USB) port  . Turn off the system and
remove the USB device from the
(USB) port  . Make sure there is no
problem with the USB device. If this
display pattern persists, contact your
nearest Sony dealer.
There is no sound.
 The USB device is not connected
correctly. Turn off the system, then
reconnect the USB device and check if
the USB MEMORY indicator  lights
up.
The sound is distorted.
 The bit rate used when encoding the
files was low. Send files encoded with
higher bit rates to the USB device.
There is noise or the sound skips.
 Turn off the system, then reconnect the
USB device.
 The music data itself contains noise.
Noise may have been introduced
when creating music data due to the
conditions of the computer. Create the
music data again.
 When using the USB storage media,
copy the files to your computer, format
the USB storage media in FAT16 or
FAT32 format, and copy the files to the
USB storage media again.*
The USB device cannot be connected
into the (USB) port  .
 The USB device is being connected
backwards. Connect the USB device in
the correct orientation.
The USB storage media which has
been used on another device does
not work.
 It may be recorded in an unsupported
format. If so, first take the precaution
of backing up important files on the
USB storage media by copying them to
your computer hard disk. Next, format
the USB storage media with a FAT16
or FAT32 file system and transfer the
backed-up audio files onto the USB
storage media again.*
Continued
