Woodstock W1752 - Manual (Page 13)

-11-
W1752 Owner's Manual (Mfg. 1/07+)
SE
T
U
P
The SHOP FOX ® Model W1752 has been carefully pack-
aged for safe transporting. If you notice the machine has
been damaged, please contact your authorized SHOP
FOX
® dealer immediately.
UNPLUG-power cord before you do
any assembly or adjustment tasks!
Otherwise, serious personal injury to
you or others may occur!
Unpacking
SET UP
The following is a description of the main components
shipped with the SHOP FOX ® Model W1752. Lay the com-
ponents out to inventory them.
Note: Some parts and hardware may already be installed
on the machine. Check the machine when you use this
inventory list.
Box Inventory (Figure 3) Qty
A. 10" Benchtop Lathe (Not Shown)........................1
B. Safety Glasses ..............................................1
C. Live Center .................................................1
D. Spur Center .................................................1
E. 3" Faceplate ................................................1
F. Tool Rest ....................................................1
G. Knock Out Bar ..............................................1
H. Tool Rest Lock Handles ...................................2
Inventory
Figure 3. Box inventory.
If any parts are missing, examine the pack-
aging for the missing parts. For any missing
parts, find the part number in the back
of this manual and contact Woodstock
International, Inc. at (360) 734-3482 or at
[email protected]
SUFFOCATION HAzARD!
Immediately discard all
plastic bags and pack-
ing materials to elimi-
nate choking/suffocation
hazards for children and
animals.
B
C
D
E
F
G
H