Samsung Digimax 101 - Manual (Page 72)

72
SETTING UP THE CAMERA SYSTEM
RESET
This menu allows you to reset all the camera settings to the default.
DATE/TIME, LANGAGE, VIDEO OUT settings will not be changed by doing the [RESET] menu.
After resetting the camera system, check the video output signal of the camera is same as that of the
country where you are.
Refer to following for information on the default.
Selecting the default camera setting
Steps 1 to 5 are the same as those for selecting the SETUP
mode(p.68).
6. Press the UP( ) /DOWN( ) button and select [RESET].
7. Select [YES] or [NO] by pressing the LEFT( )/ RIGHT( )
button and press the OK button.
[Selecting YES] : All the camera setting is changed to the
camera default setting.
[Selecting NO] : SETUP menu will display without the
resetting the camera system.
The default camera setting
Camera setting Default Camera setting Default
Image size 1280x1024 Slide show play back time 3 sec
Quality Fine Power off 3 min
Flash Auto flash Beep ON
LCD brightness 0 White balance Auto
EV compensation 0.0EV Quick View ON
SETUP 1/3
BEEP
FORMAT
POWER OFF
RESET
YES NO