Samsung Digimax 101 - Manual (Page 35)

35
Using the camera button to adjust the camera
RECORDING MODE
The STILL IMAGE/MOVIE CLIP mode function can be set up by using the camera button.
POWER switch
Used for turning the camera power on / off.
If this camera doesn t be operated during the specified time(about
60 SEC.), the camera power will be idle(LCD monitor off, Camera
status LED : Green) automatically(p.71). To use the camera
again, press the camera buttons except the power switch.
The camera power will be turned off automatically during
periods of inactivity. This is done to reduce battery drain. The
camera can be reactivated by sliding the power switch again.
SHUTTER button
Used for taking images for RECORDING mode (Still image,
Movie clip).
LCD button
Pressing the LCD button in the RECORDING(STILL IMAGE,
MOVIE CLIP) mode will change the display as shown below.
ADV
ANCED