Samsung Digimax 101 - Manual (Page 49)

49
RECORDING MODE
LCD BRIGHTNESS
In STILL IMAGE/MOVIE CLIP mode, you can select the LCD brightness menu.
You may adjust the LCD brightness. Brightness range : -5 ~ 0 ~ +5
Selecting the LCD brightness
1. Turn the camera power on.
2. Select STILL IMAGE or MOVIE CLIP mode by pressing
the MODE button.
3. Press the MENU button to display the STILL
IMAGE/MOVIE CLIP mode menu on the LCD monitor.
4. To shift the menu cursor to [STILL IMAGE 2/2], press the
DOWN( ) button at the [EXPOSURE] menu that is in
[STILL IMAGE 1/2].
5. Press the UP( )/ DOWN( ) button and select [LCD
BRIGHTNESS].
6. Select the desired LCD brightness by pressing the
LEFT( )/ RIGHT( ) button. The default is [0].
7. Press the Ok button to confirm the setting.
STILL IMAGE mode
MOVIE CLIP mode
STILL IMAGE 2/2
WHITE BALANCE
QUICK VIEW
LCD BRIGHTNESS
0
MOVIE CLIP
SETUP
EXPOSURE
WHITE BALANCE
LCD BRIGHTNESS
0
ADV
ANCED