Sharp FO-5550 - Manual (Page 82)

Relay Request
80
♦
If another FO-4700/5550/5700 is to be the relay machine, only
Speed Dial numbers of end receiving machines from "00" to "99"
can be entered in the relay group. To allow Speed Dial numbers
above "99" to be included in the relay group, store them in a Group
Key on the FO-4700/5550/5700.
1
Press the RELAY key and then 2.
The display will show:
Rapid Key number 4 spaces
Speed Dial number 2 spaces
Group Key number 4 spaces (for one group)
Full number Number of digits in number
(max. of 30 per number)
2:RELAY GROUP SET
ENTER #(01-10)
2
Enter a 2-digit number from “01” to
“10”. This number identifies the relay
group.
3
Press the START key.
U
RELAY
2
(Example)
0 1
START
all-FO4700.book Page 80 Friday, June 11, 1999 1:57 PM