Sharp FO-5550 - Manual (Page 58)

Sending a Fax by Automatic Dialing
56
♦
If an error or power failure occurs during transmission of a cover
sheet, retransmission will not take place.
Checking documents in memory
To display information on documents that are waiting in memory for
transmission, follow the steps below. You can also cancel a
transmission with this procedure.
1
Press the MEM. STATUS key (flip
up the Rapid Key overlay) and then 2.
TX STATUS will appear in the
display.
2
Press the # key or the
* key to scroll
through the list of transmissions. The
name (or number) of each receiving
party will appear in the display,
together with the 3-digit memory
number assigned to the transmission.
To cancel a transmission, press the
CLEAR key and then the START
key while the transmission appears in
the display.
3
When you have finished checking the
list, press the STOP key twice to
return to the date and time display.
Note: To print out a list of the documents waiting in memory for trans-
mission, press the MEM. STATUS key and then the 5 key.
W
MEM.STATUS
2
or
STOP STOP
all-FO4700.book Page 56 Friday, June 11, 1999 1:57 PM