Sharp FO-5550 - Manual (Page 154)

Optional Settings
152
Setting 33: SEPARATE MODE
If desired, you can have the fax draw a sheet of paper from the paper tray
after each fax reception. By loading colored (or large) paper in the paper
tray, each colored sheet drawn will act as a separator that makes it easy to
distinguish where one multi-page document ends and another begins. A
Transaction Report printed after a reception will also be printed from the
paper tray to act as a separator sheet. Press 1 to turn on this function (be
sure to load appropriate paper in the paper tray), or 2 to turn it off. (Note
that this function will not operate for copy jobs and print jobs from a
computer. Also, the function will turn off automatically if the paper tray
runs out of paper.)
Note for FO-4700: This setting will only appear if your dealer has
installed the paper cassette option.
♦
Initial setting: 2
Note: If you turn off the Separate Mode setting, Option Setting 16 will
subsequently appear in the display to allow you make an appropriate set-
ting for cassette selection. If you don’t make a selection, 1:AUTO
SELECTION will be automatically selected.
Setting 34: POWER SAVE MODE
This option sets the method for turning on Power Save Mode. Press 1
to select REAL TIME (turn Power Save Mode on and off by pressing
the POWER SAVE key), or 2 to select TIMER (automatic on and off
at preset times). For more detailed information, see Power Save Mode
in Chapter 5.
♦
Initial setting: 1
all-FO4700.book Page 152 Friday, June 11, 1999 1:57 PM