Sony PDW-F30 - Manual (Page 76)

76
Recording Continuous Timecode Over FAM Connections
Chapt
er 5 F
ile Ope
rat
ions
To disable FAM connections
Execute one of the procedures described in the previous
section “To make a reconnection” to make a FAM
connection between this unit and the remote computer. To
disable FAM connections, in the setup menu, set
INTERFACE SELECT >i.LINK MODE to “AV/C” (see
page 87).
Recording Continuous
Timecode Over FAM
Connections
For clips created over a FAM connection, you can record
so that the timecode is continuous with the timecode of the
last frame of the last clip recorded on the disc.
To record continuous timecode
Before you start recording, set TC MODE on page P1 of
the function menu to “REGEN”. Then write clip files to
this unit from a connected computer or other device.
With PDBK-102 option board installed: Before you
start recording, set TCG on page P1 of the function
menu to “INT” and set TC MODE to “REGEN”. Then
write clip files to this unit from a connected computer
or other device.