C03 specifications – Samson C03 User Manual
Page 8
Samson Technologies Corp.
575 Underhill Blvd.
P.O. Box 9031
Syosset, NY 11791-9031
Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 516-364-3888
www.samsontech.com
Specifications
Type
Condenser Microphone
Polar Pattern
Super Cardioid/Fig. 8/Omni
Frequency Response
40~18000 Hz
Sensitivity
-40 dBV/pa (10mv/pa)
Rated Impedance
350Ω
Equivalent Noise level
23 dB (A weighted IEC/DIN 651)
Max. SPL
142 dB (THD≤ 0.5% 1000 Hz)
Dynamic Range
119 dB
Power Supply
48V Phantom Power (IEC 268-
15/DIN 45596)
Current Consumption
7.0 mA
Dimensions
ø 54 x 180 mm
Weight
460g
Specifications subject to change without notice.
C03 Specifications
This manual is related to the following products:
See also other documents in the category Samson Tools:
- PowerBrite Pro7 (16 pages)
- Pro Rack-Mount Power Distribution PB15 (16 pages)
- S. phantom S Class (32 pages)
- 3-STRAND Class I Eye Splice (1 page)
- 3-STRAND Class I Long Splice (2 pages)
- 3-STRAND Class I Rope-to-Chain Splice (2 pages)
- 8-STRAND Class I End-for-End Splice (3 pages)
- 8-STRAND Class I Eye Splice (3 pages)
- 8-STRAND Class II End-for-End Splice (3 pages)
- 8-STRAND Class II Eye Splice (3 pages)
- 8x3-STRAND Class II End-for-End Splice (3 pages)
- 8x3-STRAND Class II Eye Splice (3 pages)
- 12-STRAND Class I End-for-End Splice (2 pages)
- 12-STRAND Class I Eye-and-Eye Tail Splice (3 pages)
- 12-STRAND Class I Eye Splice (2 pages)
- 12-STRAND Class I Eye Splice Modified for Quik-Splice (2 pages)
- 12-STRAND Class I Whoopie Sling Modified for Tenex and Tenex-TEC (2 pages)
- 12-STRAND Class II End-for-End Splice (2 pages)
- 12-STRAND Class II End-for-End Splice Modified for Dirty, Used Rope (4 pages)
- 12-STRAND Class II Eye Splice (2 pages)
- 12-STRAND Class II Tuck-Bury End-for-End Splice (3 pages)
- 12-STRAND Class II Tuck-Bury Eye Splice Modified for HMPE (3 pages)
- 12-STRAND Class II Tuck-Bury Eye Splice Modified for Saturn-12 (3 pages)
- 12-STRAND Class II Whoopie Sling Modified for AmSteel and AmSteel-Blue (2 pages)
- 16-STRAND Class I Eye Splice (3 pages)
- DOUBLE BRAID Class I Back Splice (2 pages)
- DOUBLE BRAID Class I End-for-End Splice (4 pages)
- DOUBLE BRAID Class I Eye Splice (4 pages)
- DOUBLE BRAID Class I Eye Splice Modified for Used Rope (4 pages)
- DOUBLE BRAID Class II End-for-End Splice (2 pages)
- DOUBLE BRAID Class II End-for-End Splice Modified for Turbo-37 (4 pages)
- DOUBLE BRAID Class II Eye Splice (3 pages)
- DOUBLE BRAID Class II Eye Splice Modified for TS-II and TS-II Premium (5 pages)
- DOUBLE BRAID Class II Eye Splice Modified for TS-II Turbo (8 pages)
- DOUBLE BRAID Class II Eye Splice Modified for Turbo-37 (5 pages)
- DOUBLE BRAID Class II Tips for Stripping the Cover (4 pages)
- DOUBLE BRAID Special Tips for Splicing Double Braid (1 page)
- DOUBLE BRAID Special Tips for Splicing Double Braid Used Rope (1 page)
- ROUND PLAIT Class I End-for-End Splice (2 pages)
- ROUND PLAIT Class I Eye Splice (3 pages)
- MISCELLANEOUS Lock Stitching, Whipping, and Seizing Procedures (2 pages)
- MISCELLANEOUS Smooth Ice/Flavored Ice Cover Installation (3 pages)
- MISCELLANEOUS Tools Required for Splicing (2 pages)