Sanyo LCD-42CA9S - Manual (Page 8)

8
CONNECTING LCD TV
This LCD TV uses nominal input voltages of 110-242V
AC. This LCD TV automatically selects the correct
input voltage. It is designed to work with single-phase
power systems. To reduce risk of electrical shock, do
not plug into any other type of power system. Consult
your authorized dealer or service station if you are not
sure of the type of power being supplied.
Connect the LCD TV with all peripheral equipment
before turning the LCD TV on.
CAUTION
For safety, unplug AC power cord when the LCD
TV is not in use.
Cable used for connection (This
cable is not supplied with this LCD
TV.)
Ɣ Aerial Cable
NOTE:
For all aerial circuit problems please
consult your local dealer.
Aerial Cable
CONNECTING THE AC POWER CORD
To t h e A C O u t l e t ( 11 0 - 2 4 2 V A C )
Pulls the AC power cord out from the
LCD TV. The AC outlet must be near
this equipment and must be easily
accessible.
CONNECTING OUTDOOR AERIAL
Outdoor Aerial
AC POWER CORD
LCD-CA9S-A NEW.indd 8 2/06/2008 2:07:51 PM