Sanyo LCD-42CA9S - Manual (Page 34)

34
MENU OPERATION
The Dealer Mode has 7 different modes: VOLUME LOCK, TUNING LOCK, START MODE, OSD, RC,
RESET and AC POWER MODE.
SIDE CONTROLS
REMOTE CONTROLS
VOLUME LOCK
This function is used to limit the maximal volume.
START MODE
The LCD TV will automatically enter to the setting mode while being
turned on. You can select "OFF", "TV", "AV1-S", "AV2-DVD", "PC",
"HDMI 1" or "HDMI 2" in START MODE. When it is set "OFF", it will
keep the mode before being turning off.
OSD
When it is set "OFF", Corresponding OSD cannot display on the
screen while operating.
RESET
This function returns all setting values to the factory default
settings.
DISPLAY
button
Press
POINT
ŸźŻ/Ź
buttons
Press POINT Ż Ź buttons to select a maximal volume.
VOLUME LOCK will be the default selection. (When you adjust
others, press POINT Ÿź buttons to select the item desired.)
Press POINT Ż Ź buttons to select "ON". (The maximal
y p ) volume is the set value by step 1.)
DEALER MODE MENU
TO DISPLAY DEALER MODE:
Press and hold Menu button on Side Controls, and then press
DISPLAY button on remote controls to display Dealer mode menu. Y
Take the way of setting VOLUME LOCK for example:
Press and hold Menu button on Side Controls, and press
DISPLAY button on remote controls to display Dealer mode
menu.
Press menu button to exit menu operation.
DEALER MODE
RC
When it is set "OFF", the Remote Control will be locked and cannot
be used.
VOLUME LOCK
OFF START MODE
OSD
RC
RESET
DEALER MODE
ON
OFF
ON
SEL ADJ EXIT MENU
OFF TUNING LOCK
AC POWER MODE ON
TUNING LOCK
The way to prevent user from executing the Tuning function.
AC POWER MODE
You can set "STANDBY", "ON" or "LAST" in AC POWER MODE.
When LCD TV is connected to an outlet with AC power cord, it will
enter the status as setting.
1
2
3
4
5
MENU button
LCD-CA9S-A NEW.indd 34 LC 44