beautypg.com

Menu operation (tv/ av mode) – Sanyo LCD-42CA9S User Manual

Page 25

background image

25

MENU OPERATION (TV/ AV mode)

The setting for sound system is only active in TV mode.

Press POINT

Ż Ź buttons repeatedly to select "D/K", "I", "M" or "B/G" until the best sound effect is

reached.

This feature is used to remove unwanted channels from the channel scanning memory.

You can skip the unused or undesired channels when you are selecting a channel using POINT

Ÿź but-

tons.

This function is only active in TV mode.

The settings for sound system, colour system or skip are automatically memorized in the programme

position.

To swap the channels between two stored programme positions.

Press MENU button to display the main menu.

SOUND SYSTEM

COLOUR SYSTEM

The setting for colour system is only active in TV or AV mode.

Usually, the colour system is set to the position of "AUTO". In case of abnormal colour, repeatedly press

POINT

Ż Ź buttons to select "AUTO", "PAL", "SECAM", "NTSC" or "NTSC4.43" until the best colour effect

is reached.

SKIP

CHANNEL SWAP

POINT

Ż Ź buttons to select "CHANNEL", and will display

CHANNEL menu. Press POINT

Ÿź buttons to select

CHANNEL SWAP.

Press POINT

Ż Ź buttons to enter into the Channel Swap

menu. Press POINT

Ÿź buttons to select the CHANNEL or

TARGET CHANNEL, then Press POINT

Ż Ź buttons to set

the swap channel. And then press POINT

Ÿź buttons to

select SWAPPING item, then press POINT

Ż Ź buttons to

select "OK".

1

2

3

Ŷ Press BACK button to return to the previous menu.
Ŷ Press MENU button or wait for 5~60 seconds (refer to

"DURATION" on page 29) to exit menu operation.

LCD-CA9S-A NEW.indd 25

2/06/2008 2:08:26 PM

This manual is related to the following products: