beautypg.com

Sony GRAND WEGA KF 60DX100 User Manual

Page 84

background image

Other Information

84

There is no twin picture or it is
just static

Be sure your twin picture is set to a video source/channel that has a program airing.

You may be tuned to a video input with nothing connected to it. Try cycling
through your video inputs using

TV/VIDEO

.

Twin View is not set to receive a signal from the AUX input. If you have
connected a VCR, DVD player or satellite receiver to the AUX input on the LCD
projection TV, it will not show in the second picture.

You get the same program in the
window picture as in the main
picture

Both may be set to the same channel. Try changing channels in either the main
picture or the window picture.

You may be running all your channels through a cable box. The cable box will
only unscramble one signal at a time, so you cannot use the Twin View feature. If
possible, run a direct cable to your LCD projection TV’s VHF/UHF input (this will
only work if your cable system provides an unscrambled signal.)

You cannot get anything but TV
channels in your second picture

Be sure the video label has not been set to skip your video inputs. See the Setup
menu on page 68.

Favorite Channel does not
display your choices

Verify that

Favorite Channel

is set to

Manual

in the Channel menu (see

Favorite Channel

” on page 62).

Some video sources do not
appear when you press

TV/

VIDEO

Ensure that Video Label is not set to “Skip” (see “

Video Label

” on page 68).

Problem

Possible Remedies

This manual is related to the following products: