Sony GRAND WEGA KF 60DX100 - Manual (Page 46)

Using the Features
46
Watching the TV
Many TV features can be accessed directly through the remote control. The
following will explain the function of some of the buttons found on your
remote control.
Buttons for LCD
Projection TV
Operations 1 TV (FUNCTION)
Activates the remote control for use with the LCD projection TV.
2 ANT— (AUX input)
Press to change between the VHF/UHF input and the AUX input.
3 TV (POWER)
Turns the LCD projection TV on and off. If a video input indication (e.g.,
VIDEO 1, VIDEO 2) appears on the screen, press
TV/VIDEO or CH +/ – until
a channel number appears.
4 0-9 and ENTER
Use for direct channel selection. Press 0-9 to select a channel (for example,
to select channel 10, press 1 and 0 ). The channel will change after 2 seconds,
or you can press ENTER for immediate selection.
5 CH +/–
Press to scan through the channels (+ up or – down).
6 VOL +/–
Press to adjust the volume (+ up or – down).
7 JUMP
Press to alternate or jump back and forth between two channels. The LCD
projection TV will jump between the current channel and the last channel
selected.
8 MUTING
Press to mute the sound. “MUTING” will appear on the screen and will dim
three seconds later. To restore the sound, press again or press
VOL + .
9 FREEZE — (yellow labeled button)
This is useful when you need to copy down information that appears on the
LCD projection TV’s screen (see “Using the Freeze Function” on page 53).
q; SLEEP
Press repeatedly until the LCD projection TV displays the approximate time
in minutes (15, 30, 45, 60, or 90) that you want the LCD projection TV to
remain on before shutting off automatically.
Cancel by pressing SLEEP until “SLEEP OFF” appears.