beautypg.com

Sony GRAND WEGA KF 60DX100 User Manual

Page 83

background image

Other Information

83

O

th

e

r In
fo

rm
a

tio

n

Dotted lines
or stripes

Adjust the antenna.

Move the LCD projection TV away from noise sources such as cars, neon signs, or
hair-dryers.

LCD projection TV is fixed to
one channel

Use

Auto Program

in the Channel menu to add receivable channels that are not

presently in TV memory (see page 63).

Check your Channel Fix settings (see page 63).

Double images, ghosts, or
merged colors

Use a highly directional outdoor antenna or a cable (when the problem is caused by
reflections from nearby mountains or tall buildings).

Set the Image Revision to an appropriate value. The default setting is Auto. If
ghosts, doubled images, or merged colors appear with Auto, select the best value
from 0 to 3 (see page 68).

Cannot operate menu

If the item you want to choose appears in gray, you cannot select it.

Turn the LCD projection TV’s power off and on again.

Cannot receive any channels
when using cable TV

Use

Auto Program

in the Channel menu to add receivable channels that are not

presently in TV memory (see page 63).

Check your cable settings.

Make sure

Cable

is set to

ON

in the Channel menu (see page 62).

Cannot gain enough volume
when using a cable box

Increase the volume of the cable box using the cable box’s remote control. Then
press

TV (FUNCTION)

and adjust the LCD projection TV’s volume.

Channel Index does not display
all available channels

Make sure Cable is set to

ON

in the Channel menu (see “

Cable

” on page 62).

Use

Auto Program

in the Channel menu to add receivable TV channels that are

not presently in TV memory (see page 63).

Cannot receive channels

Unable to select a channel

Use

Auto Program

in the Channel menu to add receivable TV channels that are

not presently in TV memory (see page 63).

Lost password

In the password screen (see page 69), enter the following master password: 4357.
The master password clears your previous password; it cannot be used to
temporarily unblock channels.

Cannot change channels with
the remote control

Be sure you have not inadvertently switched your LCD projection TV from
channel 3 or 4 setting if you are using another device to change channels.

If you are using another device to control channels, be sure the “function” button
for that device has been pressed, or the slide switch is set correctly. For example, if
you are using your cable to control channels, be sure to press

SAT/CABLE

.

Cannot cycle through the other
video equipment connected to
the LCD projection TV

Be sure the

Video Label

feature has not been set to

Skip

(see page 68).

There is a black box on the
screen

You have selected a text option in the Setup menu and no text is available. (see
page 67
to reset Setup selections) To turn this feature off, select

OFF

in the

Caption Vision

option. If you were trying to get closed captioning, select

CC1

instead of

Text 1-4

.

Problem

Possible Remedies

(Continued)

This manual is related to the following products: