Seagate Barracuda ST340015A - Manual (Page 30)

22 Barracuda 5400.1 Product Manual, Rev. G
3.2 Breather filter hole precautions
This section contains information regarding the precautions which should be
taken regarding the breather filter hole in Seagate hard disc drives. Proper
precautions should be taken to ensure full functionality and prevent possible
damage to the drive.
Figure 3. Breather filter hole location
Caution: Do not cover, seal, or insert any object into this hole.
This hole has two purposes:
• To allow condensation inside the hard disc to escape
• To allow air pressure inside the hard disc to equalize with ambient pressure
If this hole is covered, sealed, or penetrated by any object, the drive reliability
may be compromised and could lead to permanent damage—doing so voids
the warranty.
Breather Hole
Do not cover
or seal.