beautypg.com

Programming the remote – Sony KDS-70R2000 User Manual

Page 45

background image

45

GB

Usi
ng Op

ti

onal

Eq
uip
m

e

n

t

Programming the
remote

This remote is preset to operate Sony TVs, most Sony
DVDs, VCRs and AMPs (Home Theatre, etc.).
To control VCRs and DVDs of other manufacturers
(and some other Sony VCR, DVD and AMP models),
do the following procedure to programme the remote.

Note

Before you start, look up the three-digit code for your brand
of DVD, VCR or AMP from the “Manufacturer’s codes” on
page 46.

1

Press and hold the DVD, VCR or AMP
function button you want to programme on
the remote, then press

,

keeping the

function button pressed down.

The selected function button (DVD, VCR or
AMP) will flash.

2

Press the number buttons to enter the
three-digit manufacturer’s code number
while the button is lit. If code is not entered
within 10 seconds, you must perform the
step 1 again.

3

Press .

When the programming is correct, the selected
function button will flash twice, and when not, it
will flash five times.

Digital audio
(PCM) component
K

Connect to the DIGITAL OUT
(OPTICAL) socket using the
Optical audio cable.

Note

The

DIGITAL OUT (OPTICAL)

socket only supports digital terrestrial
signals.

Hi-Fi audio
equipment L

Connect to the audio output
sockets

to listen to the sound

from the TV on Hi-Fi audio
equipment.

To connect

Do this

2

3

1

1

Continued

This manual is related to the following products: