Sony KDS-70R2000 - Manual (Page 44)

44 GB
Connecting to the TV (rear)
DVD player
Decoder
DVD recorder
VCR
Video game
equipment
DVD player
Digital receiver
Decoder
PC
Hi-Fi audio
equipment
DVD player with
component output
VCR
Digital audio (PCM)
component
DVD player
S VHS/Hi8/
DVC camcorder
with S-Video
output
(for only
HDMI IN 6)
To connect Do this
Video game
equipment, DVD
player or decoder
E Connect to the scart socket /
1. When you connect the
decoder, the scrambled signal from
the TV tuner is output to the
decoder, then the unscrambled
signal is output from the decoder.
DVD recorder or
VCR that supports
SmartLink F Connect to the scart socket /
2. SmartLink is a direct link
between the TV and a VCR/DVD
recorder.
VCR, DVD player
or S VHS/Hi8/DVC
camcorder with S-
Video output G Connect to the scart socket /
/ 3. You can select the
input signals by setting “AV3
Input” in the “AV Set-up” menu
(page 34). If the equipment has an
S Video socket, connect it through
an S Video - scart adaptor interface
(not supplied).
DVD player with
component output
H Connect to the component sockets
and the audio sockets
/ 4.
Digital receiver or
DVD player I Connect to the HDMI IN 5 or 6
socket if the equipment has a
HDMI socket. The digital video
and audio signals are input from
the equipment. If the equipment
has a DVI socket, connect the DVI
socket to the HDMI IN 6 socket
through a DVI - HDMI adaptor
interface (not supplied), and
connect the equipment’s audio out
sockets to the audio in the HDMI
IN 6 sockets.
Notes
• The HDMI sockets only support
the following video inputs: 480i,
480p, 576i, 576p, 720p, 1080i and
1080p. To connect a PC, use the
PC
socket.
• Be sure to use only an HDMI
cable that bears the HDMI logo.
PC J Connect to the PC sockets. It
is recommended to use a PC cable
with ferrites.