Sony KDS-70R2000 - Manual (Page 18)

18 GB
Additional operations
To access Text
Press /. Each time you press /, the display changes
cyclically as follows:
Text and TV picture
t Text t No Text (exit the
Text service)
To select a page, press the number buttons or PROG
+/-.
To hold a page, press
/ .
To reveal hidden information, press / .
To jump a page, press and
F
/
f
, then press (for
three digit pages).
Tips
• Ensure that the TV is receiving a good signal, or some text
errors may occur.
• Most TV channels broadcast a Text service. For
information on the use of the service, select the index
page.
• When four coloured items appear at the bottom of the Text
page, Fastext is available. Fastext allows you to access
pages quickly and easily. Press the corresponding
coloured button to access the page.
To freeze the picture – Picture freeze
You can freeze the current picture to make a note of a
telephone number or recipe.
1
Press .
The frozen picture is displayed on the right of the
screen. You can watch a moving picture on the
left.
2
Press again to return to normal TV
mode.
To change the screen format manually to
suit the broadcast
Press repeatedly to select Smart, 4:3, Wide,
Zoom, or 14:9.
Displays conventional 4:3 broadcasts with an
imitation wide screen effect. The 4:3 picture is
stretched to fill the screen.
Displays conventional 4:3 broadcasts (e.g. non-wide
screen TV) in the correct proportions.
Displays wide screen (16:9) broadcasts in the correct
proportions.
Displays cinemascopic (letter box format) broadcasts
in the correct proportions.
Displays 14:9 broadcasts in the correct proportions.
As a result, black border areas are visible on the
screen.
* Parts of the top and bottom of the picture may be cut off.
Tips
• Alternatively, you can set “Auto Format” to “On”. The TV
will automatically select the best mode to suit the
broadcast (page 30).
• You can adjust the position of the picture when selecting
Smart, 14:9 or Zoom. Press
F
/
f
to move up or down
(e.g. to read subtitles).
To Do this
Switch off the TV
temporarily
(standby mode) Press TV "/1.
Switch off the TV Press 1 on the TV (front).
Switch on the TV
without sound from
standby mode Press %. Press 2 +/- to adjust
the volume.
Adjust the volume Press 2 + (increase)/
- (decrease).
Mute the sound Press %. Press again to restore.
Access the
Programme index
table (in analogue
mode only) Press . To select an analogue
channel, press
F
/
f
, then press
.
To access the Input signal index
table, see page 23.
Smart*
4:3
Wide
Zoom*
14:9*