Sim2 Multimedia HT 250 - Manual (Page 14)

HT 200/250
16
11 REMOTE CONTROL
DESCRIPTION
The remote control requires four 1.5V, AAA alkaline
batteries.
Insert the batteries, taking care to match the polarity, as
indicated in the battery recess of the remote
(Fig. 42) .
11.1 REMOTE CONTROL FUNCTIONS
UP arrow key
Not active in this model
LEFT arrow key
OSD ON/
Menus selection
Press to freeze image.
Press again to restore
Selects zoom
lens adjustament
Optimises graphic
image display
Stand-by
ON switch/
Direct input selection
OSD off
DOWN arrow key
RIGHT arrow key
OSD ON
Menus selection
Not active on this model
Displays the selected
input’s information and
the projector status
Activates the video
recorder signal’s filter
Image aspect ratio
selection
+
-
+
-
+ -
+ -
four 1.5V
AAA alkaline
batteries
Fig. 42
Fig. 43
0/A displays the input
selection menu
Selects lens focusing
adjustament