Siemens GIGASET SX255 - Manual (Page 31)

30
Connecting devices
Gigaset SX205-255i / englisch / A31008-X255-B100-1-7619 / devices.fm / 09.10.2003
Connecting PC via USB
You can connect a PC with a cable using the USB port on your base and connect one or
more PCs without a cable using the Gigaset M10x data modules.
Your base then offers you the option of using a connected PC to:
◆ Configure your base
◆ Manage phonebooks from the PC, base and handsets.
Using a PC connected with a cable or via a Gigaset M101 Data, you can also fax from the
PC (using fax emulation with no hardware requirements).
In conjunction with the enclosed software (talk&surf 6.0) this offers you the option of
◆ using data transmission and the Internet from the PC using the ISDN network access
on your base (e. g. surfing the Internet, e-mail, home banking).
◆ Transmit data between different PCs.
Wireless PC connection: Gigaset M101 Data and
Gigaset USB-Adapter DECT/M105 data modules
The Gigaset M101 Data with V24 interface and the Gigaset DECT/M105 USB Adapter
with USB interface give you the option of establishing a wireless connection between
your PC and the base. A connection via a Gigaset M10x Data data module provides you
with a 64 kbit/sec. interface.
The internal phone numbers PC 41 to PC 48 are set aside for this purpose on your base.
For installation, see the installation instructions on the CD-ROM enclosed with the data
module.
Wire-based PC connection: Base USB port
You can establish a wire-based connection to a PC using the USB port on your base
(page 7). The internal phone number PC 40 is set aside for this purpose on your base.
1. Plug the USB cable into the base only first of all (do not connect it with the PC im-
mediately).
2. Only connect the USB cable to the PC when prompted to do so by the PC program
talk&surf 6.0 .
A wire-based connection via the USB port on the base provides you with a 128 kbit/sec.
interface.
Gigaset Repeater
You can increase the range of your handsets with the Gigaset Repeater. Your telephone
is set up to use a Gigaset Repeater (accessory). To ensure the Repeater is installed cor-
rectly, Repeater mode must be activated on the base (see handset operating instruc-
tions).
i
You can find further information in the instructions for the software
(talk&surf 6.0).