Siemens GIGASET SX255 - Manual (Page 29)

28
Connecting devices
Gigaset SX205-255i / englisch / A31008-X255-B100-1-7619 / devices.fm / 09.10.2003
No device connected
For each TAE connection, to which no device is connected, the device type must be set
to No function, in order to prevent malfunctioning of the Reject all (see handset oper-
ating instructions) and Busy on busy (see handset operating instructions) ISDN func-
tions.
Making calls with devices on the analogue connection
(TAE connection)
Telephones with tone dialling (DTMF = dual tone multi-frequency dialling) can be oper-
ated on the analogue connections. Telephones with pulse dialling are not supported.
Automatic line seizure
With automatic line seizure activated, the external line is seized as soon as the receiver
is lifted. As a consequence, normal internal dialling is no longer possible. However, an
internal call is still possible by way of an internal enquiry using the S key. You can acti-
vate automatic line seizure with any added-feature handset (see added-feature handset
operating instructions).
Making external calls
Making internal calls
Group call to all internal users
Call waiting
You hear the call waiting tone during your external call.
Switch to waiting caller – Toggling
Auto. line seizure inactive Auto. line seizure active
c Q ~ c ~
Auto. line seizure inactive
c ~
Auto. line seizure inactive
c P / with GAP
INT
P
either ...
a Call disconnected, wait for ring c
or ...
S Caller 1 on hold.
S Caller 1 on hold.
S Caller 2 on hold etc.