Sherwood V-768 - Manual (Page 7)

8
• For some countries like Europe, the unit incorporates the TV and VCR SCART connectors.
• You can connect the unit to TV and VCR easily using the SCART connections without other cumbersome audio
and video connections.
• During operation of the unit, these connectors can deliver either the COMPOSITE(regular) video or the S-VIDEO
(Y and C) signals as well as the audio L and R signals.
• To obtain the highest picture quality, you can make the COMPONENT VIDEO connections between the unit and
TV.
• Depending on the video signal(s) to be used, adjust the SCART OUT settings to your preference and set your
TV and VCR to the corresponding one to match the selected settings of the unit.
(Refer to “When selecting the SCART OUT(Regional Option)” on page 33 and the operating instructions of the
component(s) connected.)
Note:
• In this connection, do not connect the unit to the TV through a VCR. Otherwise the image may be disturbed due
to the copy protection function.
• In this connection, to view a program source from the VCR on the TV screen or to record a TV broadcast onto
the VCR, be sure to turn the unit off to enter the standby mode.
C O N N E C T I N G T O T V A N D V C R W I T H S C A R T
ENGLISH
A/V SCART
VCR
TV
Monitor TV
VCR
This unit
21-pin SCART
cable(not supplied)
21-pin SCART
cable(not supplied)