Sherwood V-768 - Manual (Page 37)

38
When selecting the CHANGE PASSWORD
Continued
1
Tilt the CURSOR/ENTER button upward or downward to select the CHANGE PASSWORD, then
press the CURSOR/ENTER button.
2
Input 4-digit passwords in sequence for old password, new password and confirmation, then press
the CURSOR/ENTER button.
• When the password is input correctly, the rating level is set to the preferred level and the previous menu screen
is displayed.
• If you input a wrong password, “PASSWORD INCORRECT” is displayed. In this case, input the password again
• When you input a wrong password 3 times, the setup mode is canceled and the unit enters the stop mode.
• While displaying the verify password menu screen, when the RETURN button is pressed, the previous menu
screen will be displayed.
Note :
• If you forgot your password, input “0629” that has been set to at factory.
4
Input a 4-digit password with pressing the NUMERIC buttons, then press the CURSOR/ENTER
button.
• When each password is input correctly, the previous menu screen is displayed.
• While displaying the change password menu screen, when the RETURN button is pressed, the previous menu
screen will be displayed.
Note :
• Do not forget the password.
If you forgot your password, input “0629” that has been set to at factory.
ENGLISH