Sherwood V-768 - Manual (Page 6)

7
• You can enjoy DVD Videos by simply connecting this unit to a TV. To hear improved audio sound quality,
connect the AUDIO OUTs to the AUDIO INs of DVD(, AUX, CD, etc.) of your amplifier or receiver.
• To connect these jacks correctly, refer to “Connecting AUDIO OUTs” and “Connecting VIDEO OUTs” on the
previous page.
Notes:
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cord which converts
stereo audio output to monaural.
• Do not connect the VIDEO OUTs of the unit to the TV through a VCR. Otherwise the image may be disturbed
due to the copy protection function.
CONNECTING TO TV WITH AUDIO AND
ENGLISH
This Unit
AUDIO OUT
COMPOSITE
OUT
COMPONENT OUT
S-VIDEO
OUT
C r /P r
C b /P b
Y/PY
2
1
R
L
COMPOSITE VIDEO IN
AUDIO IN
Monitor TV
AUDIO IN of DVD, AUX, CD, etc.
S-VIDEO IN
COMPONENT VIDEO IN
Green Blue Red
Amplifier or receiver
• Connect this jack to the DIGI LINK jack of some Sherwood receivers such as RD-7108/R, RD-8108/R, R-863/R,
R-963/R, etc. that uses the DIGI LINK III remote control system.
(For details, refer to the operating instructions of that.)
Note:
• When the remote control units of some Sherwood receivers do not have function buttons for DVD player, you
cannot operate this unit with those.
C O N N E C T I N G S Y S T E M
DIGILINK
Sherwood equipment with
DIGI LINK remote control system
System control
cord
Some receivers with
DIGI LINK III remote
control system only
CD player
Tape deck
Graphic equalizer