Sony CM-B1200 - Manual (Page 38)

38
You can adjust the volume of the ringer, keybeep, and earpiece on
the Sounds menu. In addition, you can select the type of sounds
heard when the phone rings and when you press buttons. (See
page 36 for instructions on how to reach the Sounds menu.)
Adjusting the ringer volume [F11]
1 Push to select “Ringer Vol.” from the
Sounds menu.
The Ringer Vol. menu appears.
2 Turn up to raise the ringer volume,
and down to lower it.
You can select from five ringer volume settings: “off,”
“low,” “med.” (medium), “high,” and “escalate.”
3
Push to enter the new setting.
The standby display reappears.
If you turn off the ringer volume
The message “–Ringer Off–” is displayed at the top of the screen
when the standby display appears.
Tip
If you set the ringer volume to “escalate,” the telephone rings twice at a low volume, then once
at medium volume, and thereafter at a high volume.
Muting/unmuting the microphone [F12]
You can mute/unmute the phone during a call directly, without using the Sounds
menu, by pushing and holding
.
In addition, you can mute/unmute the microphone during a call using the Sounds
menu. This feature is disabled in standby mode.
1
During a call, push to select “Sounds”
from the Features menu.
The Sounds menu appears.
Adjusting the volume
-Ringer Off-
12:34P 12/25
:Saved #s
:Features
SOUNDS
Ringer Vol
Mute/UnMute
Keybeep Vol
F11
RINGER VOL.
HIGH
:Choices
:To Set
F11
RINGER VOL.
med.
:Choices
:To Set
F11
SOUNDS
Ringer Vol
Mute/UnMute
Keybeep Vol
F12
Sounds menu
B2200/36-49final 3/2/98, 1:20 PM 38