Sony CM-B1200 - Manual (Page 37)

37
Advanced
Features
2 Turn to select “Display,” then push .
The Display menu appears. The arrow and the last
digit of the submenu number flash, indicating which
submenu will be selected by pushing
(in this case
the Banner menu [F61]).
3
Turn to select “Backlight,” then push .
The Backlight menu appears. The current setting is
indicated by a check mark (✓) and is displayed in
capital letters. (See page 59 for an additional
description on setting the backlight.)
4
Turn to select the setting.
The available options appear in a cyclic manner as you
turn
.
5 Push to enter the new setting.
The standby display reappears.
To exit from the Features menu
Press
END
or hold down
CLR
to return to the standby display.
To return to the previous display
Press
CLR
. To go back further, press
CLR
again.
Notes
• If you reach the last menu item and try to turn further, a beep indicates that you have
reached the end of the menu. To view other menu items, turn in the opposite direction.
• The standby display automatically reappears after 30 seconds of inactivity.
Tip
Each menu item can be accessed quickly from the standby display by pushing , and then
pushing the number of the menu item. The item number then appears in the upper left corner of
the display in step 3. For example, you can access the backlight setting by pushing
followed
by 6 MNO and 2 ABC .
DISPLAY
Banner
Backlight
Auto-Hyphen
F61
BACKLIGHT
FOR 7 SECS
:Choices
:To Set
F62
BACKLIGHT
off
:Choices
:To Set
F62
My Phone
12:34P 12/25
:Saved #s
:Features
B2200/36-49final 3/2/98, 1:20 PM 37