Sharp VT19B-PW User Manual

Page 9

19” Fast Scan Series User Guide 150-062

-7-

MENU FEATURES CONT.

Feature

Function

Color

Color temperature is a measure of the “warmth” of the image colors. The
available range is between 5000 to 9300K. Follow these steps to change the
color temperature and adjust individual R,G,B color control.
1. With the menu off, push the MENU button. Push the

button until the

“Color” screen is displayed.

2. Use the

button to select Color1, Color2, or Color3.

3. Push the MENU button to open the “Color1”, “Color2”, or “Color3”

adjustment screen.

4. The current color temperature is shown highlighted between 9300 and

5000K. Use the

button to adjust the color temperature.

5. Adjust the color temperature as close to the desired temperature as

possible using only the

and

buttons. To fine tune the color hue, use

the

button to select R(ed), G(reen), or B(lue), then use the

and

buttons until you reach the desired color.

Note: Recall does not reset the color settings.

Clear Moire

A “moire” pattern can appear on your screen, looking like a series of
concentric circles or arcs. To eliminate this pattern, use the clear moire
adjustments.
1. With the menu off, push the MENU button. Push the

button or

button

until the “Screen” OSD is displayed.

2. Use the

button to select Clear Moire.

3. Push the MENU button to open the clear moire adjustment screen.
Use the

button to adjust horizontal moire; use the

button to

adjust vertical moire.

Focus

Use the focus control when the image displayed on the screen is not sharp in
all areas.
1. With the menu off, push the MENU button. Push the

button until the

“Screen” OSD is displayed.

2. Push the

button to select Focus.

3. Push the MENU button to open the Focus adjustment screen.
Use the

button to adjust focus along the left and right areas of the

screen; use the

button to adjust the center area of the screen.

Degauss

The Degauss feature will remove color impurities caused by magnetic fields.
Do not use the Degauss feature more than once within a 30-minute period.
1. With the menu off, push the MENU button. Push the

button until the

“Advanced” screen is displayed.

2. Push the

button to select Degauss.

3. Push the MENU button to execute the Degauss function. The degaussing

screen will appear.

Note: The monitor may buzz momentarily, the image colors may change

and the image will jiggle for a few seconds. These effects are normal.

4. After a few seconds, the degauss main menu will return.