SmartBridges sB3010 - Manual (Page 46)

Page 46 of 82
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul™ Nexus User Guide
2.9. Wireless Settings Management
Radio Configuration Main page can be accessed from the Radio menu. Its contents will be slightly
different for each operating different mode.
2.9.1 Wireless Settings
Refer to the Wireless Settings for the different modes.
2.9.2 Security
When the security setting is ACL+WEP in Root Bridge mode, you need to enter the Remote Radio’s
MAC address in the ACL Entry and select whether the operating mode of the Remote Radio is Bridge
or Router (NAT) from the drop down menu.
Figure 2-32 ACL+WEP Settings
WEP encryption is used as security for the airHaul Nexus radio in the Remote Bridge and Remote
Router Mode. To enable or disable WEP or change the relevant settings, the user can go to the
security setting page on the web interface. The following table describes the information for the Data
Encryption.
Table 2-5 Data Encryption
Page Items Descriptions
Authentication Select authentication method between open system and shared key
Open system: Open System is null authentication. With WEP enabled
and valid WEP key at both ends, it provides data encryption. Clients
without the correct WEP key can still associate but cannot send packets
through.
Shared key: Strict authentication for both authentication and data
encryption. Clients must provide valid WEP key to associate.