SMC Networks SMC2870W - Manual (Page 47)

N
AVIGATING THE
W
EB
B
ROWSER
I
NTERFACE
35
Wireless
Settings
To configure the SMC2870W as an Client Bridge, all you need to
do is define the radio channel, the Service Set Identifier (SSID),
and encryption options.
In Client Bridge mode or Repeater mode, the radio channel and
SSID (Service Set ID) of the SMC2870W must be set to the same
values as those of the access point with which they are
associated.
If the SMC2870W is in Access Point mode, you must specify a
common radio channel and SSID (Service Set ID) to be used by
the Wireless Ethernet Bridge and all of your wireless clients. Be
sure you configure all of your clients to the same values.