Sound Performance Lab GOLDMIKE MK2 2485 - Manual (Page 21)

GoldMike MK2 21
• 24-Bit/96kHz A/D converter (upgrades after sale can be done
by clients).
• Lundahl input and output transformers (upgrades after sale
by authorized service personnel or SPL only).
24/96 A/D Converter
The optional 24/96 Converter module (model 2376) provides a
digital output for the GoldMike MK2 in the form of an S/P-DIF
output with RCA and optical connectors (in parallel). The
converter transmits 24-bit signals.
The module is based on a 24-bit converter by AKM® with a
variable sample rate of up to 96 kHz. All common sample rates
can be selected (see below). Highly accurate quartz oscillators
ensure a clean, low-jitter master clock.
Sample Rate
The 24/96 AD converter module allows you to select among the
four most common sample rates of 44.1, 48, 88.2 and 96 kHz.
Using the 44.1/48 button, select one of the two basic sample
rates (out: 44.1 kHz; in: 48 kHz). The x2 button doubles these
sample rates to select 88.2 or 96 kHz respectively.
Dig. Out
The converted S/P-DIF signal is routed in parallel to the RCA
and optical outputs. The signal is in professional format with no
sample rate data in the status block.
Options
OPTICAL SPDIF SPDIF
x2
48
44,1
24/96 AD
Converter DIGITAL OUTPUTS SYNC INPUT SAMPLE RATE
INPUT OUTPUT OUTPUT
SYNC
LOCK
Model
2376
Made in
Taiwan