Sherwood R-956 - Manual (Page 24)

2 4
Repeat the above steps 1 to 3 to memorize
other stations.
4
After selecting the tuner as input source,
select the preset tuning mode.
1
When using the NUMERIC buttons on the remote
control.
Examples)
For “3” :
For “15” :
The station has now been stored in the memory.
When using the NUMERIC buttons, the station is
stored automatically without pressing the MEMORY/
ENTER button.
A stored frequency is erased from the memory by
storing another frequency in its place.
If “MEMORY” goes off, start again from step 2,
above.
Then “PRESET” lights up.
MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned
off, are memorized.
INPUT SELECTOR settings
Surround mode settings
Preset stations, etc.
Note : If the electricity fails or the AC input cord is
disconnected for about 2 weeks. All memorized
functions will be lost. Please enter them into
memory again.
When using the NUMERIC buttons on the remote
control.
Examples)
For “3”:
For “15”:
When selecting the desired preset number with the
NUMERIC buttons, the desired preset station will be
tuned to automatically without first selecting the preset
tuning mode.
Tuning to preset stations
Select the desired preset number.
2
Select the desired preset number (1~30)
and press the MEMORY/ENTER button.
3
TUNING/PRESET
MODE
within 2 seconds
1
3
5
within 2 seconds
1
3
5
MULTI CONTROL
DOWN UP
MULTI CONTROL
DOWN UP
MEMO/ENTER
Presetting radio stations
You can store up to 30 preferred stations in the
memory.
“MEMORY” flickers for 5 seconds.
Tune in the desired station with auto or
manual tuning.
1
Press the MEMORY/ENTER button.
2
MEMO/ENTER
ENGLISH