Sanyo VPC-CG6EX - Manual (Page 72)

English
58
EXPOSURE CORRECTION
By assigning the exposure correction operation shortcut to the SET button
(page 132), you can make the image lighter or darker when capturing images.
1
Assign the operation shortcut
to the SET button (page 132).
2
Toggle the SET button in the
direction for which the
operation shortcut was
assigned.
h The exposure correction bar
appears.
3
Toggle the SET button to the
left or right to adjust the
exposure.
h The exposure setting
numerical value is shown at
the left end of the exposure
bar.
h The exposure can be set to a
value from –1.8 EV to
+1.8 EV.
h The exposure correction bar
is canceled when the MENU
button or the SET button is
pressed.
HINT
The exposure correction setting is canceled in the following cases:
i When the pointer is set to the center position.
i When the camera is set to the playback mode.
i After the power is turned off.
12 00:00:15
SET button
Exposure correction bar
Pointer