Samsung HT-Q80 HT-TQ85 - Manual (Page 35)

ENG
68
To tune in to a preset station, press on the
remote control to select a channel.
• Refer to Step 2 on page 67 to
automatically or manually tune in
to a station.
2 1
• “PRGM” flashes in the display.
3
Example: Presetting FM 89.1 in the memory
Press TUNING/CH
to select "89.10".
Press the FM/XM
button and select the
FM band.
• Press the FM/XM MEMORY button before
‘PRGM’ disappears from the display.
• ‘PRGM’ disappears from the display and
the station is stored in memory.
5 4
• You can select between 1 and
15 presels.
Press the FM/XM
MEMORY button.
Press the FM/XM
MEMORY button
again.
6 To preset another
station, repeat
steps 2 to 5. Press
to select preset
number.
RADIO OPERA
TION
Presetting Stations
67
2 1
Tune in to the
desired station.
Press the FM/XM
button and select
the FM band.
Automatic Tuning 2
Manual Tuning
2 1 Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
Press the
FUNCTION button to
select the FM band.
Press the STOP ( )
button to select "MANUAL"
and then press and hold
button to automatically search the band.
Automatic Tuning 2
Press STOP ( ) to select
MANUAL and then briefly
press to tune in to a lower or
higher frequency.
Manual Tuning
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
When is pressed, a
preset broadcast station is
selected.
Press and hold TUNING/CH to
automatically search for active
broadcasting stations.
Briefly press TUNING/CH to
increase or decrease the
frequency incrementally.
Automatic Tuning 1
Remote Control Unit
Main Unit
Listening to Radio
• This unit does not receive
AM broadcasts. Note
Q80/85(47~88)_XAA_ENG 2003.3.1 5:37 PM Page 62