Summit BROTHER HL-630 OPC - Manual (Page 37)

37
Sharp Cartridge Part # AR-201ND
OEM Stated Yield: 30,000
The developer is rated for 30,000 pages. The default
setting on the machine is to keep running even after
the 30K pages. That default setting can be set by the
dealer to stop at 30K pages. It is considered a dealer
option.
To enter the simulation mode, press the "CLEAR
KEY", "INTERRUPT KEY", "0" KEY",
"INTERRUPT KEY", "MAIN CODE" "START
KEY", "SUB CODE" "START KEY",
"Main code" for clearing the developer = 42
"SUB CODE" for clearing the developer = 1
The developer count is now cleared.
To exit the simulation mode press the "CLEAR ALL
KEY"
Turn the machine off and on.
Sharp AR-163 OPC
Sharp Cartridge Part # AR-201DR
OEM Stated Yield: 30,000
Inside the drum cover, there is a gear with a “Flag”
on it. Remove the gear and place it so the flag is at
the 12:00 position. This flag when the cartridge is
installed, will turn down, and engage a switch in the
machine. This tells the machine there is a new drum.
If the drum unit has never been rebuilt, this flag gear
is not there. It can be ordered from Sharp, but there
is also a reset that can be done through the menu
To enter the simulation mode, press the "CLEAR
KEY", "INTERRUPT KEY", "0" KEY",
"INTERRUPT KEY", "MAIN CODE" "START
KEY", "SUB CODE" "START KEY",
"Main code" for clearing the developer = 24
"SUB CODE" for clearing the developer = 7 The
drum count is now cleared.
To exit the simulation mode press the "CLEAR ALL
KEY" Turn the machine off and on.
Sharp AR-5015 Toner Cartridge
Sharp Cartridge Part # AR-016T
OEM Stated Yield: 16,000
The toner cartridges in these machines have a chip
that must be replaced each cycle. The chip is located
on the gear end of the cartridge. Replacement toner
and chips are available.
Sharp AR-5316 Toner Cartridge
Sharp Cartridge Part # AR-016TD
OEM Stated Yield: 9,000
The toner cartridges in these machines have a chip
that must be replaced each cycle. The chip is located
in a pocket in the cartridge. It can be held in place by
either 2 clips, 1 screw, or 2 screws. Replacement
toner and chips are available.
Sharp JX-9200 OPC
The Sharp JX-9200 engine has many variations. The
known reset procedures are listed by machine model
#, and cartridge part #.
Sharp FO-26/28/29/AL-80
Sharp Part # FO-26DR/28DR/29DR/AL-80DR