Symbol Technologies WS 2000 User Manual

Page 81

System Administration

The Information portion of the Subnet Stats screen displays general information about
the subnet.

• The HW address is the Media Access Control (MAC) address of the switch’s WAN

port, which is set at the factory.

• The IP addresses displayed here for the subnet connection are set on the subnet screen

(Network Configuration --> WLAN --> ).

The Received and Transmitted portions of the screen display statistics for the
cumulative packets, bytes, and errors received and transmitted through the WAN interface
since the WAN was last enabled or the switch was last rebooted.

Received Field

Description

RX Packets

The total number of data packets received over the subnet

RX Bytes

The total number of bytes of information received over the subnet

RX Errors

The total number of errors including dropped data packets, buffer
overruns, and frame errors on inbound traffic

RX Dropped

The number of data packets that failed to reach the subnet

RX Overruns

The total number of buffer overruns (when packets are received faster
than the subnet can handle them)

RX Frame

The total number of TCP/IP data frame errors received

Transmitted
Field

Description

TX Packets

The total number of data packets sent over the subnet

TX Bytes

The total number of bytes of information sent over the subnet

WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004