Speco Technologies DVR-4CF - Manual (Page 25)

DVR-4CF 24
schedule record mode is setup to “M” (mix) or “A” (alarm).
10. SENSOR RECORD FRAMERATE: Press《ENTER》button to setup different
recording speed, when a sensor device has been triggered (this setup is only
active when the recording speed under schedule record mode is setup to
“M”(Mix) or “A” (Alarm)).
NTSC:30,15,10,7,5,4,3,2,1fps.
PAL :25,12,8,6,4,3,2,1fps.
11. ALARM REC TIME: Press《ENTER》button to setup sensor recording time
after a sensor device has been triggered (this setup functions is only active
when the recording speed under schedule record mode is setup to
“A”(Alarm)).
8.4.1 RECORD MODE
■■■
RECORD MODE
T: TIME A: MOTION+SENSOR
M: TIME+MOTION+SENSOR
V
< M A T T T T T T T T T T T T T T T T T T T T－T >
0 3 6 9 12 15 18 21 24
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT