Speco Technologies DVR-4CF - Manual (Page 14)

DVR-4CF 13
7.5 Note!
1. “Auto Sequence” function operates only during recording or under live status
(Dwell Time: 5 seconds). Sequencing will bypass a channel with video loss if
programmed accordingly (Example: Video Loss occurs on CH3, sequencing
order: CH1→CH2→CH4→QUAD).
2. To deactivate “Auto Sequence” function, press 1, 2, 3, 4, or QUAD.
3. Withdrawing the CF card, each time before the system (DVR) enters recording or
playback status, it auto detect the hard disk (detection time is about 5 seconds and
WD brand hard disk is about 30seconds).
4. When coping data from the hard disk to a CF card, make sure that the data has
been completely copied onto the CF card, before withdrawing it from the slot.
Otherwise, error may occur, system displays “CF CARD REMOVED”, and auto
returns to live display.
5. Camera name may only be viewed during recording display and under live display.