Speco Technologies DVR-4CF - Manual (Page 24)

DVR-4CF 23
8.4 Record Setup
RECORD SETUP
■■
> RECORD TYPE EACH
VIDEO QUALITY NORMAL
TIME RECORD FRAMERATE 04
MOTION RECORD FRAMERATE 15
SENSOR RECORD FRAMERATE 15
ALARM REC TIME 10
RECORD MODE
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
1. Cursor (>) position indicates the current function selected.
2. Use《←》and《→》button to move the cursor to the desired item.
3. Use《ENTER》button to make changes.
4. Use《MENU》button to exit “RECORD SETUP” selection.
5. “Record Setup” is situated on the second menu layer. Under this selection user may setup
the following function: Record Type, Video Quality, Time Record Framerate, Motion
Record Framerate, Sensor Record Framerate, Alarm Record Time, and Record Mode.
6. RECORD TYPE: Press《ENTER》button to select between “QUAD” and
“EACH” mode.
7. VIDEO QUALITY: Press《ENTER》button to select different quality recordings
(HIGH, NORMAL or LOW).
8. TIME RECORD FRAMERATE: Press《ENTER》button to setup the recording
speed when “T” mode is setup under schedule record mode.
9. MOTION RECORD FRAMERATE: Press《ENTER》button to setup different
recording speeds per channel, suitable when the recording speed under