SMC Networks EZ Networking SMC2208USB/ETH User Manual

Page 20

4| Driver Installation on Mac OS

There are two ways to install Driver on Mac OS. First, select the”ADM8513 Driver for Mac
OS” folder, and double click the”Installer” icon. Second, follow the steps below.

Install

1. On Mac OS9, uncompress the ADM8513_Install_xx_xxxx.sit file

2. Double click the “ADM8513Install” file.

3. Select Custom Install and double click “Install” icon.

4. Reset the computer when install successfully.

5. When reset is finished, plug in the USB device.

6. From TCP/IP table, select the active USB device, and then save change.

7. Re-enter the USB device in the TCP/IP table to check DHCP.

Uninstall

(If the USB device is in use, follow step 1. If not, jump to step 2)
1. Unplug the USB device and then reset the computer. Wait for the reset to finish.

2. Double click the “ADM8513Install”.

3. Select Custom Remove, and then pick ADMUSB 1.00

4. Double click the Remove icon.